Products
-
DX51D Galvanized Steel Coil Zinc Coated Gi Sheet Galvanized Steel Rolls
description For galvanized coils, the sheet steel is immersed in a molten zinc bath to make a sheet of zinc coated on its surface. It is mainly produced by continuous galvanizing process, that is, the rolled steel plate is continuously immersed in a plating tank with zinc melted to make galvanized steel plate; alloyed galvanized steel plate. This kind of steel plate is also manufactured by hot dip method, but immediately after being out of the tank, it is heated to about 500 ℃ to form an...
-
Cathode Copper 99.99%–99.999% High Quality Pure Copper 99.99% 8.960g/cbcm
Cathode copper generally refers to electrolytic copper The blister copper (containing 99% copper) is pre-made into a thick plate as the anode, the pure copper is made into a thin sheet as the cathode, and the mixed solution of sulfuric acid and copper sulfate is used as the electrolyte. After electrification, copper dissolves from the anode into copper ions (Cu) and moves to the cathode. After reaching the cathode, electrons are obtained and pure copper (also known as electrolytic copper...
-
Factory Supplier H-type Steel H Beam Astm A36 Q345b H-beam Steel I-beam
description H-beam is an economical section and high-efficiency profile with more optimized cross-sectional area distribution and more reasonable strength-to-weight ratio. It is named because its cross section is the same as the English letter “H”. Since all parts of the H-beam are arranged at right angles, the H-beam has the advantages of strong bending resistance, simple construction, cost saving and light weight in all directions, and has been widely used. introduce The se...
-
Rebar Hrb355 Hrb400 Hrb500 8mm 10mm 12mm 14mm 16mm Ribbed bar Deformed bar Bar
classification The hot-rolled ribbed steel bar is divided into three grades: HRB335 (the old grade is 20MnSi), grade three HRB400 (the old grade is 20MnSiV, 20MnSiNb, 20Mnti), and grade four HRB500. There are two commonly used classification methods for reinforcing bars: one is to classify according to geometric shape, and the other is to classify or classify according to the cross-sectional shape of transverse bars and the spacing of bars. Type II.This classification mainly reflects the...
-
High Quality Coiled Hot Rolled Steel Wire Rod Coiled 60 Grade Rebar Deformed Bar
ddescription Application overview Hot-rolled ribbed steel bars are widely used in high-speed railways, nuclear power plants, Olympic venues, the Three Gorges Water Control Project and other national key projects and some landmark buildings. Round steel is widely used in ships, vehicles, aircraft, railways, bridges, pressure vessels, machine tool parts. Hot rolled round bar After hot rolling, the section is usually round, and the finished steel bar has a smooth surface. Eigenvalue The qua...
-
Astm A192 CD Seamless Carbon Steel Pipe Hydraulic Steel Pipe 63.5mm x 2.9mm High Quality Steel Pipe
description Steel pipe (pipe made of steel) has a hollow cross-section that is much longer than the diameter or circumference of steel. According to the cross-sectional shape, it is divided into circular, square, rectangular and special-shaped steel pipes; according to the material, it is divided into carbon structural steel pipes, low-alloy structural steel pipes, alloy steel pipes and composite steel pipes; Steel pipes for thermal equipment, petrochemical industry, machinery manufactur...
-
Cold Rolled Steel sheet DC01-06 DC01-DC06 s235jr cold rolled mild steel carbon plate
Product advantages and Hardness Details Product advantages: 1. Durable, convenient, quality assurance 2. There are various specifications and models, which can be customized according to the specifications 3. Uniform thickness, reliable quality, easy to use and wide range of uses 4. Adequate inventory and spot supply Hardness Details: The surface Rockwell hardness of annealed plain carbon steel is generally 55+-3, and the hardness of unannealed cold-rolled hard-rolled strip steel is abov...
-
Q195A-Q235A Sheet Steel High Quality Customized Cold Rolled Steel Plate
description Cold rolling is made of hot-rolled coils as raw materials, which are rolled at room temperature below the recrystallization temperature. The thickness of cold-rolled sheet is generally between 0.1–8.0mm, and the thickness of cold-rolled steel sheet produced by most factories is below 4.5mm. Cold rolling is made of hot-rolled coils as raw materials, which are rolled at room temperature below the recrystallization temperature. The thickness of cold-rolled sheet is general...
-
Galvanized steel plate in coil 28 gauge galvanized corrugated steel roofing sheet
description Galvanized steel sheet refers to a metal substrate that is galvanized on both sides of a cold-rolled steel sheet, which can be directly made into paint buckets or other metal containers, and can also be used for decorative panels. The galvanized sheet is plated with colored paint to become the colored zinc sheet. The wall decoration generally uses galvanized iron sheet above 183g/m2, while the roof decoration generally uses galvanized iron sheet above 244g/m2. In addition, th...
-
Gl Gi Jis Astm Dx51d Az150 Galvanized steel sheet Hot Dip Sgcc Z275 Galvanized Steel Strip
Classification Galvanized steel plate is to prevent the surface of the steel plate from being corroded and prolong its service life, and the surface of the steel plate is plated with a layer of metal zinc. According to the production and processing methods, it can be divided into the following categories: 1. Hot-dip galvanized steel sheet. A steel sheet is dipped into a bath of molten zinc and a piece of zinc is adhered to its surface. At present, it is mainly produced by the continuous ...
-
Astm A36 Hot Rolled Checkered Plate S235jr Steel Sheet 4320 Boat Sheet A283 A387 Ms Mild Alloy Carbon Iron Sheet
parameters Dimensions of hot rolled steel sheets Common thickness: 0.8, 1.0, 1.2, 1.5, 1.8, 2.0, 2.35, 2.45, 2.50, 2.70, 2.75, 2.8, 2.9, 2.95, 3.0, 3.25, 3.3, 3.5, 3.75, 3.8, 3.9, 3.95, 4, 4.25 , 4.5, 4.7, 4.75, 5, 5.5, 5.75, 6, 6.75, 7, 7.5, 7.75, 8, 8.75, 9, 9.5, 9.75, 10, 10.5, 11, 11.5, 12 Width: 1000/1219/1250/1500/1600/1800/2000/2200/2500 Length: 2000/2438/2500/3000/6000/8000/roll Extraordinary width: 300~3000mm; Extraordinary thickness: 600~12000mm description The h...
-
Hot Rolled Steel Sheet astm A36 Ss400 Q235b Sheet Carbon Steel Plate 30mm Thick Price
description Hot-rolled coils are made of slabs (mainly continuous casting slabs) as raw materials, which are heated and made into strips by rough rolling mills and finishing mills. The hot steel strip from the last rolling mill of the finishing rolling is cooled to the set temperature by laminar flow, and is coiled into a steel coil by the coiler. The finishing line (leveling, straightening, cross-cutting or slitting, inspection, weighing, packaging and marking, etc.) is processed into s...
